69893.15

68578.17

KEF

JBL

Q3 Meta

RALLYBAR

Home Theatre Speaker Specification

Home Theatre Speaker Specification

Dynamic

Dynamic

Uni-Q Driver Array
LF - MF : 165 mm Aluminum Cone
HF : 25 mm Vented Aluminum Dome With MAT

Transducers : 4X 2.75” ( 70 mm ) Woofers, 2X 1”( 25 mm ) Tweeters, 2 X 7.2"( 182.8 mm ) 1 X 3"( 76.2 mm ) Racetrack Passive Radiators

4 Ohms ( Min. 3.2 Ohms )

NA

87 dB

NA

Crossover Frequency : 20 KHz
Frequency Range ( -6dB ) : 42 Hz - 20KHz
Frequency Response ( ±3dB ) : 49 Hz - 20KHz
Typical In-Room Bass Response ( -6dB ) : 39 Hz
Harmonic distortion ( 90dB, 1m ) : <2% 110 Hz & Above, <1% 135 Hz - 20 KHz

45 Hz - 40 KHz

NA

DC 9.6-16V

15 - 150 W ( RMS )

Two-Way Bass Reflex

150 W ( RMS )
300 W PEAK

109 dB

> 80 dB

No

Yes

8.2 Kg

5.25 Kg

Speaker : 357 mm X 210 mm X 305 mm

Soundbar : 537.5 mm X 126.7 mm X 118 mm

Black, White, Brown

Black

KEF Q3 Meta Home Theatre Speaker
Port Bungs
Rubber Feet
Magnetic Grille
User Manual & Warranty Card

JBL RALLYBAR Bluetooth Speaker
1X G-Clamp
1X Soundbar
1X Keychain
4X Flat Washers
2X Mount Cleats
1X Small Wrench
2X M5 Screw Nuts
2X C-Clamps ( 2” )
2X Security Cables
2X C-Clamps (1.75”)
2X Long M5 Screws
2X Short M8 Screws
2X Short M5 Screws
1X Quick Start Guide
2X Straps With Velcro
2X Rubber Top Covers
1X L-Small Allen Wrench
1X T-handle Hex Wrench
1X Safety Sheet & Warranty Card
2X Thick Rubber Strips ( For 1.5” Pole )
2X Thin Rubber Strips ( For 2” & 1.75” Pole )
1X 12ft ( 3.66m ) Power / Ground Wire Harness

Complementary colour-matched grilles offer the perfect balance between driver protection and aesthetics.
Q3 features KEF's revolutionary Meta material technology that can absorb 99% of the unwanted noise from the rear of the driver for pure and natural sound.
KEF's 12th Generation Uni-Q driver acts as a single point source to disperse sound more evenly for an immersive and cohesive soundstage with better clarity.
The Q Series speakers feature a contemporary minimalist design with a satin finish that offers a premium, subtle glow. Available in Satin Black, Satin White, and Walnut finishes, they are designed to blend effortlessly into any interior.
A critical component of the Q series is the refined crossover, which ensures seamless integration of all speaker parts. More than 1,000 specific measurements are taken for each speaker model, allowing precise signal path and optimization for best possible performance.

3 Different Gain Settings : RALLYBAR S offers 3 different Gain settings when connected by Aux-in audio:2V, 4V, and 6V.
IP66 Rated Water & Dust Resistant : IP66 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.
150 W Class-D Amplifier Built-In : The 150 W ( THD <1% ) Class- D amplifier ensures powerful, high quality JBL Original Pro Sound when you take the wheel or helm.
Innovative Mounting Kits Design : The innovative mounting kits design ( patent pending ), offers multiple position combinations on top and back to accommodate a variety of installation requirements.
Support Broadcast Mode : Broadcast Mode allows RALLYBAR to connect to multiple RALLYBAR family products ( RALLYBAR, RALLYBAR S and RALLYBAR XL ), allowing each soundbar to play the same audio source.
RALLYBAR Can Detect The Audio Source Automatically According To The Source Priority Definition : USB disk >Bluetooth> AUX-IN audio source. Higher priority source can break-in Lower priority audio source.
Music Remote Control By JBL Click : When user’s smartphone connected to the JBL RALLYBAR and a JBL Click Bluetooth controller( sold separately ), you can use the JBL Click to control the music from your smartphone ( “play, pause”, “next track” ,etc. )